Description
MADRIX LUNA
The easy-to-use and reliable network node.
The MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB.
Art-Net / Streaming ACN / USB
Art-Net or Streaming ACN data is directly converted to DMX512. Optimize and decentralize cabling to cover any distance to the device using Ethernet network.
4/8/16 DMX-OUT + 1 DMX-IN
4, 8, or 16 XLR ports (5-pin, female) distribute the corresponding number of DMX universes per unit. 1 XLR port (5-pin, male) can be used for DMX input. You can use several units at the same time for larger projects.
Benefits
Any project greatly benefits from dependable data distribution and efficient operation. With MADRIX LUNA, you can use any compatible software or hardware controller. In addition, you can connect to MADRIX 5 via USB.
Sync mode
The software MADRIX 5 and the MADRIX hardware allow you to fully synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions.
Easy Configuration
MADRIX LUNA offers powerful features, especially in combination with MADRIX 5. Take full advantage of pixel mapping and voxel mapping. The configuration of the device is quick and easy.
3rd-party controllers
MADRIX LUNA complies with the official protocol specifications and can be used as a regular node with your other consoles, controllers, or software solutions.
High Quality Design
Devices are built 19″ x 1U or 19″ x 2U. They feature a fanless, noiseless, low-energy design, a durable metal case, and NEUTRIK plugs. 2 premounted brackets make rack mounting possible. 5 indicators quickly show the status of a device.
Upgradable firmware
The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable for future enhancements. You can access and change specific device settings conveniently using the built-in web configuration page.
Did You Know?
When MADRIX LUNA is used as a receiving unit, the 100 MBit/s RJ45 Ethernet connection is more than enough. For particularly large projects, we recommend to use Art-Net and 1 GBit/s for the network switch and network card. For the sender of all the data, a higher bandwidth is required. Often, Art-Net data is sent in broadcast mode, where all receivers get all the data. With MADRIX 5 however, we also support unicast mode to just sent the required data to the single units to save bandwidth. In all cases, MADRIX LUNA provides the performance you need.
Connectivity
- • 4x/8x/16x DMX-OUT
- • 1x DMX-IN
- • 1x RJ45 Ethernet port
- • 1x USB port
- • 1x Power socket
Package Contents
- • 1x MADRIX LUNA
- • 1x Power cord (IEC C13)
- • 1x USB 2.0 cable (certified)
- • 2x Rack-mount brackets (already mounted to the device)
- • 1x Technical manual / quick start guide
Features
Art-Net and USB interface for output of 2048 channels
- Can receive and process up to 512 DMX channels
- Can transmit up to 2048 DMX channels
- The device is cooled by passive convection cooling
- Control via Art-Net
- Built with NEUTRIK connector
- The device can be connected via USB to the PC
- (19″) 48.3 cm rack installation 1 U
- Made in Germany
- The device can be connected via RJ-45 etherCON (F) mounting version to the PC
- For further information about this product, please refer to the Data Sheet under “Downloads”
Technical specifications
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 5,00 W |
| IP classification: | IP20 |
| Protection class: | Protection class I |
| Power connection: | Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| DMX channels: | Input 512 Output 2048 |
| DMX input: | 1 x 5-pin XLR (M) mounting version |
| DMX output: | 4 x 5-pin XLR (F) mounting version |
| Network connection: | 1x RJ-45 etherCON (F) mounting version |
| Cooling: | Passive convection cooling |
| Control: | Art-Net |
| USB port: | USB 2.0, type B |
| Use of brands: | Built with NEUTRIK connector |
| PC connect: | Via USB Via RJ-45 etherCON (F) mounting version |
| Housing design: | (19″) 48.3 cm rack installation 1 U |
| Dimensions: | Width: 48,3 cm Depth: 7,6 cm Height: 4,45 cm |
| Weight: | 1,63 kg |
Packaging units
| PU | EAN | Weight | Dimensions |
|---|---|---|---|
| 1 | 4260263421141 | 1,98 kg | 54,5cm x 17cm x 6cm |
